-
Bolex MST (7-pin) Power Cable, 4-pin XLR Male, ~2m (6.6ft)
The 4-pin XLR connector is made by Neutrik. The cable is thicker than necessary to support long cable lengths (up to 8m) and to support being dragged along the floor. This is intended to be used with an AC/DC adapter, yet it can be used in other ways as described below.
-
Bolex 7-pin crystal sync controller cable, ~0.5m (20″)
It has a 7-pin male Amphenol-Tuchel connector on both ends.The current Amphenol-Tuchel connectors I use appear in the first three photos.
-
Bolex EL 5-pin Remote Control Cable w/ Switch, ~1m (3.3ft)
This ~1m remote cable allows you to turn the EL camera on/off more conveniently than using the button on the front of the camera. This cable uses an Amphenol (Tuchel) 5-pin connector. It works with the 3-pin remote ports on the MKI EL and the 5-pin remote ports on the MKII and MKIII ELs. If…
-
STL-24 crystal sync controller kit, Bolex ESM EBM EL, Tobin TXM-24 TXM-16 TXM-11
It will only work with the Bolex EL, the EBM, and the ESM! See the test instructions below. The included cable is ~0.5m (~1.6ft) long. It uses 24 gauge, four-conductor cable. It has Amphenol-Tuchel 7-pin male connectors.
