-
Bolex EL Right-Angle 4-pin Power Cable, 12V 2.1mm DC barrel plug, ~0.5m (20″)
This ~0.5m power cable allows you to connect a Bolex EL directly to a 12V battery or a regulated battery plate with a 12V 2.1mm DC port (center positive). This cable uses a 7-pin Amphenol-Tuchel right-angle connector and a 5.5mm x 2.1mm barrel plug made by MPD.
-
Bolex ESM 3-pin Power Cable, Unregulated D-Tap, ~40cm (16″)
The maximum for Bolex electronics is 15V. This ~40cm (16″) power cable uses a 5-pin Tuchel connector from Amphenol that is backwards compatible with the 3-pin male socket on the ESM. Use the ESM’s power button on the front to turn the motor on/off (unless your ESM has been modified).
-
Bolex MST 6-pin Power Cable, Unregulated D-Tap, ~45cm (18″)
The maximum for Bolex electronics is 15V. This ~45cm (18″) power cable uses a 6-pin Tuchel connector from Amphenol to connect to a 6-pin MST. Use the MST’s button on the front to turn the motor on/off (unless your MST has been modified).
-
Bolex MST (7-pin) Power Cable, 4-pin XLR Male, ~2m (6.6ft)
The 4-pin XLR connector is made by Neutrik. The cable is thicker than necessary to support long cable lengths (up to 8m) and to support being dragged along the floor. This is intended to be used with an AC/DC adapter, yet it can be used in other ways as described below.
